Adaptador Boligrafo para Ender 3 CR10 Direct Drive | Maus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mod añadible para el Ender 3 CR10 Direct Drive del creador Maus.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mod añadible para el Ender 3 CR10 Direct Drive del creador Maus.
https://www.thingiverse.com/thing:3966502
Impreso en PLA O PETG con 3 tornillos:
1M3
2M3.4
Imprimir de pie sin soportes a altura de capa de 0.15 con 20 porciento de relleno y boquilla de 0.4mm con 2 contornos y 3 tapas inferiores y 4 superiores mínimo.
Add-on mod for the Ender 3 CR10 Direct Drive from the creator Maus.
https://www.thingiverse.com/thing:3966502
Printed on PLA OR PETG with 3 screws:
1 M3
2 M3.4
Print standing without supports at 0.15 layer height with 20 percent infill and 0.4mm nozzle with 2 outlines and 3 lower and 4 upper caps minimum.
Print instructions
Category: 3D Printer Parts Summary
Mod añadible para el Ender 3 CR10 Direct Drive del creador Maus.
https://www.thingiverse.com/thing:3966502
Impreso en PLA O PETG con 3 tornillos:
1M3
2M3.4
Imprimir de pie sin soportes a altura de capa de 0.15 con 20 porciento de relleno y boquilla de 0.4mm con 2 contornos y 3 tapas inferiores y 4 superiores mínimo.
Add-on mod for the Ender 3 CR10 Direct Drive from the creator Maus.
https://www.thingiverse.com/thing:3966502
Printed on PLA OR PETG with 3 screws:
1 M3
2 M3.4
Print standing without supports at 0.15 layer height with 20 percent infill and 0.4mm nozzle with 2 outlines and 3 lower and 4 upper caps minimum.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
</div>Rafts:No
Supports:
No
</div>Resolution:0.15
Infill:
20%
</div>Filament:
PLA PLa orange