1 / 4
2.5 inch, 61mm hatch handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Boat hatch handle. Requires 8mm x 90mm bolt, nut and washer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Replacement pull for boat hatch. Requires support in the handle and upper body. Shown in PETG, 30% quarter cubic infill. 3 printed parts must be combined with a 8mm x 90mm bolt, nut and washer. Strongly recommend using thread lock as the nut falling off would be the only catastrophic failure. The thru hole is intentionally tight, sanding/filing may be necessary to make accessing the handle easy.