1 / 2
Freeze Pop Squeezer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use with a reusable silicone ice pop maker to get every last bit out!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this with these silicone ice pop molds from Amazon: https://www.amazon.ca/gp/product/B01H1CF1DK
The dimensions of the inner slot are 50mm × 5mm.
It helps to push the ice pop up from the bottom and squeeze every bit out once it starts to melt.
Printing instructions
- Print as-oriented in the .stl file
Operating instructions
- Wait for freeze pop to melt slightly.
- Insert freeze pop into slot.
- Push gently.
- Enjoy.
Safety notes
- I did not intend for this to come in contact with food.
- Please refer to https://help.prusa3d.com/article/food-safe-fdm-printing_112313 if you have other plans.
Other notes
- I've designed this with OpenSCAD in a parameterized way. If you'd like any modifications (e.g., the slot dimensions, thickness, etc.), please send me a message and I'll see what I can do.