Counting matching models…
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Utterly pointless model I designed as a bet with a friend. Its a tube squeezer.
My mom wanted a hand held citrus squeezer and she could find someone nearby that sells it so i made this model and it works great and easy to use Printed it without supports
Dog Toothpaste Squeezer - Adorable Corgi Design Wishing for a cuter toothpaste squeezer, I designed this adorable corgi version! Dimensions: Width: approx. 5.75cm (fits most toothpaste tubes) If your toothpaste is wider, you can scale the…
Cute Kitten Toothpaste Squeezer! Finally, the second design in the "Cute Animal Series" is here! Based on feedback from the first corgi design, this version features: Key Features: Larger Capacity: Accommodates bigger toothpaste tubes…
Launching the latest toothpaste squeezer inspired by a cute maid character! Key Upgrades: Larger Capacity: Accommodates bigger toothpaste tubes. Improved Grip: Tightened rotation handle (addressing user feedback about slippage on thicker…
this toothbrush squeezer works by worm drive. i included 2 rollers. 1 with no slot in the end . and 1 with the slot all the way through 1 end to make removing the tube easier. to assemble push through the top gear and holes in the frame.…
Printed in PETG, no fancy settings, no supports needed if printing with the top of the ring on the build plate.
i remixed this to make it even better. i made it wider i made the spring separate so it could be modified and replaced easy. and i made the base 1mm shallower so it would provide more spring distance. the original was harder to wind all…
Update 03.07.2025 I made another iteration of the rotor which you can find in the filesection and I will also update the assembly and printplate with that one. Added the note to print the shaft in 100% infill after the recomendation of…
Sorry i didn't have enough money to get it 3d printed so i will later upload its photos…
I designed a toothpaste tube squeezer (because my wifetold me too). to help squeeze up the toothpaste in the tube
The squeeze tubes of herbs were flopping around in my fridge door, annoying me when I wanted something from that shelf of the fridge door. This is a truly simple honeycomb holder to keep them in their place, upright. The tubeHolder.scad…
Map 🗺 of Poland 🇵🇱 Toothpaste squeezer. Can print as solid piece or in two colors/pieces. Three slit thickness options 1mm, 1.5mm or 2mm. 🖨 Printing and Assembly 🛠 Tips: No supports needed. For dual color, print the top and bottom…
Optimized for printing with a groove on the printing sheet.
About the model: Just a simple squeezer to get the most out of your toothpaste while staying out of your way. Print Info: No supports (print with arrow pointing up) 0.24 mm Layer height PLA+ Ender3 V2 Neo Print time of ~55m Liked this…
i wanted to make a smaller version than i made before. and i cloesed the gap for a tighter squeese tested and works good. :) please leave a like and a make :)
Update Improved tolerance for thicker tube edges Introduction My neighbor wanted one, so I designed it. No moving parts means no chance to break. Hope you like it. Print Settings Print in default orientation. No support needed
A simple and stable holder that allows ketchup, sauce, and dressing bottles to stand upside down without tipping over. The conical inner shape centers the bottle and supports it on the cap, keeping the contents ready to use. Dimensions:…
Meet Steve. Steve loves 2 things. Traveling and squeezing toothpaste. Don't judge. Don't you want Steve to travel with you and squeeze your toothpaste? You know you do. I travel a lot and needed a travel size toothpaste squeezer. Never…
(EN): Stop wasting toothpaste! This shark-shaped squeezer slides onto the tube and pushes every last drop out. Universal Fit: Works with standard toothpaste tubes (up to 65mm wide). Shark Design: Fun and functional aesthetic. Quick Print:…
Cheese tube squeezer for all your squeezing needs. Prints in parts, some assembly required. #1 is to insert the rod through the twist lid. #2 Push the retainer down the rotator rod. Important: Arrange the retainer so that the tab on the…
If you press-remove water from your sponges, they will dry faster (and will be less yucky). The hinge attachment is made with a 1.75 mm filament bit. WARNING : it is trongly advised to print the hinge zone, on the tray, with 100% infill.…
it is easy ti install tube and easy to remove used tubes. after assembly (all but end piece), slide tube through end of frame and roller, then insert the end piece holding it in place, the roll up tube. to remove tube just unwind the tube…
you can use this for anything with a tube - like TOOTHPASTE or TOMATO PUREE!
Model Features Fast print No supports Minimal tooth design Feeling generous? Post a photo of your print! 📸 Treat the designer to soda and a slice Disclaimers Use at your own risk DM for commercial use
This can hold 2 Injection Squeeze Bottle (36mm)
With this practical cat food pouch squeezer , you can get the very last bit out of every cat food pouch — cleanly, easily, and without sticky fingers. Short on Youtube: Wet cat food pouches often leave a surprising amount of food behind.…
here is a cat food bag squeezer wich prints without any supports and is super portable
A simple tool designed for squeezing food pouches for cats, dogs, and other household pets. The pouch slides into the narrow slot and can then be pushed through the tool to squeeze out the contents efficiently, helping reduce wasted food…
Print instructions easy to print, no support needed Infill 100% print in PETG to make it dishwasher safe Benefits bags can be easily pushed into the slot, even when you sleepy in the meowrning, no more complicated fiddling (ends often…
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
Simply enter the bottem of the tube into the squeezer and spin until the tube is squeezed and the contains are collected
My child loves apple juice but doesn't have the fine motor skills to avoid squeezing too hard and shooting apple juice out of the straw. Simply slide the apple juice box into the sleeve and juice will no longer shoot out of the straw.
A toothpaste holder that holds the tube vertically and allows you to squeeze its content. Between the bottom cap and the central cage, you need to fit two springs to maintain tension. Then, you can glue the bottom cap to hold it in place.…
This is a holder for juice boxes (we call them poppers around here). It'll take a 60mm x 40mm popper, which is the standard size in Australia (fits Coles/Woolies/GoldenCircle/Just Juice etc). The hexagon pattern provides a little grip and…
Saw an ad for such a thing, then made it. Works OK. Sample shown is with food safe PLA. Bar required is 3mm x 45mm.
I was browsing some toothbrush holders and came across tooth paste squeezers. So I thought to myself why not combine these two. This holder has two holes for toothbrushes a hole for toothpaste (wide and narrow cap). The right side has its…
This is a modern an minimalistic toothpaste squeezer, that helps you to get event the smallest remains out of your toothpaste tube.
More INFO: https://hackaday.io/project/195228-streaming-audio-player-squeezelite An audio streaming player based on PiCorePlayer OS (raspberry) with a volume control that controls the AV receiver via HTTP. The volume control via the…
Most "tube squeezer" designs are based on forcing the tube through a fixed slot. This is either achieved by manually cramming the tube through a slotted novelty-shaped plastic toy or by using a flimsy rotating key in a feeble attempt to…
it has a mechanism to secure to ratcheting gear and to release the gear to unwind. no supports
This tool is a squeezer i use to force a viscous fluid through a syringe filter. In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...…
Designed to be simple and low profile with minimal 45° chamfers on the bed side to give enough space for bed adhesion and simple overhangs that should be easily printable. You can print with mouse ear brims if your printer has poor bed…
This is a stereo squeezebox player based on a Raspberry Pi, the components inside are: a Raspberry Pi 2 or 3 a Hifiberry audio card + a tiny amp board (or similar) or a Hifiberry Amp (or similar), Original 7" Raspberry touch screen and…
It is almost the same as the original but bigger to fit bigger cream tubes.
Reuploaded from Thingiverse Made by ottenjr Summary Printed in 3 parts. Cap can be securely pressed or glued onto shaft. I advise printing as a solid object. Should be wide enough to accommodate all toothpaste tubes while comfortably…
easy to use. useful if you dont want to be squeezing your toothpaste tube constantly.
Enceinte Multi-room DIY - ESP32 avec Amplificateur Ce projet vous permet de créer une enceinte multi-room compacte et personnalisable, imprimable en 3D, avec une petite gamelle de 2 pouces et une carte ESP32 pour gérer la connexion sans…
This is a toothpaste squeezer I designed for my nephew who is a messi and Ronaldo supporter.
This is a squeeze fan that uses gears and a lever to bring you wind. Use this video to assemble:
Designed for an isopropanol squeeze bottle it fit perfectly on mine . Print This can be printed in any color and any material.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
I came across Bryan Stansell's toothpaste squeezer, and found it very effective, but I didn't liked it was that wide on the toothpaste tubes I use, I tried scaling his model, but didn't really liked the result. So I remixed it to fit…
I wanted to try Luke's toothpaste squeezer, but noticed it was designed for big tubes, and the toothpaste I use come in smaller, 45mm wide tubes. The already existing remixes didn't really provided what I wanted. So here's my shorter…
This is a football lovers toothpaste squeezer. I paused print to change colour filament. Printed in PLA Black and lilacyPink
Deadpool toothpaste squeezer Printed using PLA Paused between layer heights for filament colour change
Blips and Chitz - Squirt,Squeeze, Spray, and Play!! All Day, License Plate Frame, Rick and Morty Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
This model has a great design and can be used for many purposes! This is a really quick print that print very smoothly mainly because this is a non-complex model that is a very easy print! Many of you have seen tooth pastes tubes (I hope)…
Simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Utterly pointless model I designed as a bet with a friend. Its a tube squeezer.
Simple device to assist in getting food out of the pouches that they come in. Inspired by the toothpaste squeezers. I made 2 slots for different uses, 1x4mm for wider pouches & 1x2.5mm. Slot is 140mm wide. I printed it with 100% infill…
Print out of any material in any speed. Very easy print (I would recommend at least 3 walls, 3 layers bottom and top, and 20% infill for strength as this part will be under strain) Slide the corner of the toothpaste container into the gap…
I had delayed uploading these after being stiffed on a commission for a SqueezeAmp version and feeling quite deflated about it. These are tuned for ABS due to the potential for heat creep with PLA. Print in other materials at your own…
I am uploading this as a companion to the other Hi-Fi cases I have made. I do not intend to support this at all. I didn't particularly want to upload it as it was meant to be a commission that I was stiffed over and the cables are very…
a fully 3d printable toothpaste squeezer! this version is designed for the big tubes but it will still work the same on small ones. i recommend at least 20% infill, and if you can let it cool off before you take it off to prevent…
It's finally here! The toothpaste squeezer 3000 has undergone an update and has become the toothpaste squeezer 4000! And if you've followed the updates on this models many updates, you will for SURE be excited for Oct 31, where the model…
It's litteraly just scaled down, but it works, and it's still easy to hold, even though it's small. Just to be clear, this is not the Oct 31 update
Have you ever gotten through that one tube of toothpaste and struggles to get the last of the paste out? If your answer is yes, then this Design is definitely for you. It consists of a holder with three slots for toothpaste squeezers,…
This is a version 1.0 of my lemon squeezer, it works really well! Not only for lemons, but for other fruits such as oranges, watermelon, and more. The only problem with this one is that the juice accumulates and does not go through the…
Are you tired of just trying to get toothpaste on your brush dont worry use this tool and enjoy If something is wrong modelled just type review or just if u have problem with it
Vymačkávač masti, krému, barvy, ... z tuby. Squeezer for ointment, cream, paint, ... from the tube.
A simple device for squeezing out the remaining toothpaste in the tube
This is a remix of https://www.thingiverse.com/thing:1147252 because it was very wide. My remix is 55mm wide exactly what I need for all of the toothpastes. Support You can support me by liking and downloading my projects or you can…
A sleek looking plain and simple squeezer, for all kinds of tubes where you want to squeeze the rest out of.
Simple squeezer for tubes of different sizes 0.6mm, 1mm and 2.5mm. Simple and fast printing resulting in a solid and compact piece.
I added a bulged midsection to push the remains of toothpaste in the top of tube from the original model Printed in PLA - 215c / 65c / 0.28 / 5 perimeters / 15% infill, nothing special, only I added 5 walls to avoid infill in the lower…
this toothpaste squeezer has a ratcheting system with a ratchet release and it has a tube guide that lets the tube get close to the roller. ratchet is turnable both ways (cw and ccw). one way it tightens and the other it lets you position…
Provided 3mf files for own slicing and presliced gcode files. MAKE SURE TO RAISE THE MODEL IN SLICER IF YOUR'E CREATING YOUR WON GCODE Model size: 90 x 90 x 7mm Toothpaste insertion hole size: 55 x 1mm or 55 x 0.8mm Both versions are the…
Update: another improvement of the design for stronger prints (Feb 07 2026). See the pictures for the printing orientations I did not like what I had downloaded and decided to design my own tooth paste squeezer. There are two pieces, the…
This is a Print in Place Toothpaste squeezer. Print standing up and make sure to print with 100% infill at least near the top where the two parts connect. You will need good layer adhesion in this part as well. I have printed off a…
Tooth Paste Squeezer has two versions. One for small and one for large toothpaste tubes
![Toothpaste Tube Squeezer [BETA]](https://media.printables.com/media/prints/1047757/images/7940989_e6bcfb90-a622-4b42-ae43-b9d07d34a392_ac84de3c-8d55-4960-9a17-f40322238446/snimek_obrazovky_2024-10-22_150729-removebg-preview.png)
