Gridfinity Solderingstand and Sponge Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2x4 gridfinity soldering stand, it holds a metal soldering iron holder and a standard kitchen sponge.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 1
- Views
- 378
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A 2x4 gridfinity soldering stand, it holds a metal soldering iron holder and a standard kitchen sponge. The screw hole is 4.5mm in diameter and the countersink for the screw head is 9mm in diameter this is a bit snug. My sponge is 58 x 78 mm.
The existing metal part is https://www.biltema.se/verktyg/lodning/lodningstillbehor/lodkolvstall-2000021081 and is almost guaranteed sold in other places in Europe.
It stays stable with the entire weight of my soldering iron and its cable.
Edit: I realized I designed this so that the screw on the bottom occupies the place where the gridfinity baseplate edge is, this can be fixed by cutting away some of the material from your baseplate, but it isnt as modular because of this design flaw :(