Upside down spool holder mount(for Ikea Lack)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.00 – €3.66 net (excluding VAT)
For file: No Support - PETG - Spool Holder Mount_0.2mm_PETG_MK3S_3h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.33 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 3.58 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A holder to easily attach the MK3/S original included spool holder upside down in an enclosure.
- Rating
- 4.667 / 5
- Likes
- 36
- Downloads
- 129
- Makes
- 5
- Views
- 1,768
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A holder to easily attach the MK3/S original included spool holder upside down in an enclosure.
I didn't want to screw anything into the top surface of my lack tables, so I decided to make something to attach the original spool holder upside down to the table above.
This will allow you to easily slide the holder in and out when needed. I provided a video below:
I used three 5.0x25mm screws to fasten it.
Print instructions
I printed it with:
0.2mm layer height
At least 20% infill
Supports optional