Bambulab feet for 1.25" Sorbothane Hemisphere
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two different friction fit feet for Bambu X1C feet, to be used with sorbothane 1.25" hemishperes.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 169
- Makes
- 2
- Views
- 2,135
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
This is a design imspired by the feet designed by Via_the_Verrazzano. I liked the design but really didnt like how the feet in no way mounted to the printer, but the printer just rested ontop of them. This is designed from scratch but similar.
The “friction fit” variety needs supports and is not the one i recommend if your hemispheres have a two way adhesive in it, but may be better to use if you are using a textured build plate as well, as the sticker may not adhere to the texture. it is a tighter fit then the design linked above and should be printed at 100% and will friction fit well.
The “stick on” variety is what i recommend if youi have two sided adhesive on yours, and you use a smooth build plate, as they work very well, use less material and are easier to print.
These are the feet I used, i Used 50 Duro due to order quantities, but i believe 70 is optimal due to the weight. 50 works well though i can confirm. https://a.co/d/546Wem5
You do not need to remove the stock rubber feet, the top knob friction fits into it beatifully.