1 / 6
Creality Ender 5 s1 shroud for standard 10mm and 20mm fan mod — image 1
1 / 6

Creality Ender 5 s1 shroud for standard 10mm and 20mm fan mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

inspired by the bambulabs shroud. With the modification of adding a 20mm fan the stock shroud didn't fit anymore.

Rating
5 / 5
Likes
41
Downloads
315
Makes
2
Views
1,900
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print with PETG (recommended) or PLA (don't know how that will hold up with the heat, but maybe because it is constantly cooled it works? [will test, edit: dit some warping in a closed environment] )

.16 or .20 layer height, no supports needed!

I used another tapered screw to compensate for support structures 

got some design issue's due to the extruder on the ender 5s1 is not centered this will not allow to evade the screw on the right. will see if I can compensate the design but it will not cause an issue. 

 

 

 

 

 

 

 

One millimeter to spare at the front support 2020bar 

 

If you are still rocking the 10mm fan i've added a 10mm version also (standard)

any suggestions or design-wishes let me know! Maybe a different logo or air intake.

 

changes to make:

  • make a cutout for the right screw; if anybody walks into the same design issue let me know. The screw on the right is touching the shroud, the screw on the left isn't
  • Fix the ‘R’ it will not print the floating bit

Tags