1 / 2
FPV Case for Camera-VTX module and Lipo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the camera plus vtx module of a fried Mobula7.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kind of second life for the camera and vtx module of one of my broken Mobula7. It's designed to be stand-alone attached on every rc vehicle you want to control in fpv mode. Just solder a Molex 2.0 2 pin plug to the module and glue it in it's place. As lipos i used the EACHINE 350mAh of the E016F. You can stick it to the roof of your rc car with double-sided tape or velcro.
Printed standing on its front face you need a minimal amount of supports.