Skadis Back Mount for Ikea Bror System
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.83 – €3.45 net (excluding VAT)
For file: BrorInterface_0.2mm_PETG_MK3S_3h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.14 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 3.01 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This mount allow the mount of the Skadis panel on the back of a Bror System. It works with M3 inserts. Without supports.
- Rating
- 5 / 5
- Likes
- 155
- Downloads
- 382
- Makes
- 10
- Views
- 4,776
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This mount allow the mount of the Skadis panel on the back of a Bror System. It works with M3 inserts.
I have seen others systems but I was after a design that is mostly hidden behind the panel.
It prints well without supports at .2 mm layer height. It is recommended to be done in PETG, but PLA works great also.
For a single mounting point it is needed:
- 2x M3 Screw (any from 10mm to 16mm).
- 2x M3 Washer.
- 2x M3 Thread Insert. I used a 8mm long one.
- 1x Bror Interface printed part (Left or Right).
- 1x Washer printed part (Esthetics).