RCBS Bench Automatic Priming Tool vise mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vise mount for the RCBS Automatic Priming Tool. I didn't want to mount it permanently to my bench. This mounts in a…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Vise mount for the RCBS Automatic Priming Tool. I didn't want to mount it permanently to my bench. This mounts in a vise, and hangs on the wall when not in use. It also has provision for 2 Akro bins. The section that mounts in the vise needs to be at least 50% infill for strength. Mine was printed in PLA.
V4 has the primer tube and priming pin storage locations built in. I found that to be a bit of a hassle when removing the priming tube being used when it still has primers in it, because I had to remove everything from the storage holes to prevent them ending up on the floor. So V5 eliminates those, and I've made a separate storage solution for the extras, here: https://www.thingiverse.com/thing:6108132
Category: Sport & Outdoors