Prusa standoff bed level
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the remix version from Thingverse by shrop_pat.
- Rating
- 4 / 5
- Likes
- 39
- Downloads
- 179
- Makes
- 0
- Views
- 3,425
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is the remix version from Thingverse by shrop_pat.
https://www.thingiverse.com/thing:4335944
This version cut down the height of the standoff to 3.9mm. so you will be able to use the calibration-z function on stock firmware.
This is an alternate way to level the bed on a Prusa MK3(S).
This method uses M3 threaded brass pillars which are height adjusted using convenient thumb wheels.
The wheels prints with no supports.
You will need
9 pcs. M3X5mm+6 brass standoff
8 pcs. very thin washers.
Print instructions
Recommended print this in PETG with a 0.2mm layer height.
35% fill density, 4 Perimeters.
No supports required.