Dyson V11/V10/V8/V7 Accessory Mount/Holder - Modded
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a reinforced version of the great Accessory holder by albrnick. I tried 2 times to print and use the original…
- Rating
- 3.9 / 5
- Likes
- 36
- Downloads
- 341
- Makes
- 9
- Views
- 1,285
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a reinforced version of the great Accessory holder by albrnick.
I tried 2 times to print and use the original version, but accessories cause a breaking on the support between the two holders after a couple of weeks.
So I edited the original version adding a bigger support.
I also put a reinforcement where the holder goes inside the original dyson base. This causes this holder to be VERY strong and could be a bit difficult to remove it from the base after put inside.
Attached there is only the "left" version, you can mirror it for the right one.
I tested it with Dyson V11, it should be compatible also with V10, V8 and V7 like the original one.
I printed with PLA, so I used an infill of 50% for have the support as stronger as I can.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
I used brim with tree supports.
Category: Household