Merten compatible 55mm switchplates / mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a set of 55mm compatible blindplates, switchplates and various mounts to integrate in your existing…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 114
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a set of 55mm compatible blindplates, switchplates and various mounts to integrate in your existing switchplates.
The frontplates all clip into a springed backplate that is also printed (InsertSpring). The backplate itself is compatible to standard Merten M series inserts as well. "InsertRaw" can be used for remixing stuff that can not be used with the springs.
The modules currently done are a blindplate for covering unused outlets, a cable outlet to run some wires from for example your TV to your PS5 inside the wall, and a DHT22 temperature/humidity sensor mount.
I also added one type of frame (based loosely on the M-Pure series) for 1 to 5 slots so you can fully print your frontend.
If you want to create another mount as a remix, take the blindplate as your base!
If you need one of my things printed or you want to suggest a modification on a part please drop me a message!
If you print one of my things i would be happy about some feedback and a make!
If you like my things please consider supporting my caffeine addiction!
Print instructions
Print everything lying face down. Everything is best printed on a textured sheet for nice optics. I printed my parts in PETG so the spring functions well but if you are concerned about isolation I would advise using PC. PLA is NOT recommended!