Counting matching models…
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
This is a deep easy to handle 55mm lens cap. It is 4 pieces outer shell, buttons with spring, and 2x jaws for each side The lens cap snaps together after printing. Please use PLA and 0.20mm quality settings. See notes for PETG below. To…
Zur Befestigung von Steckdosenleisten an der Wand, Werkbank oder am Tisch habe ich diesen Halter erstellt. Der Halter kann für Mehrfachsteckerleisten mit Schalter verwendet werden. Benötigt werden zwei Halter für eine Leiste. Die Halter…
Idea I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that. Printing The print is fairly self explanatory, just print it with the logo side down…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
Summary of Concept This is a 3D printable Bahtinov Mask to assist with manually focusing on the night sky. Bahtinov masks work by creating diffraction spikes from a point light source (like a star) spread out across different sections of…
Description This is a simple adaption of Tridense wall mounted headphone hanger to be used with an IKEA Skadis board. The hooks need support. The headset depicted in the image is the Logitech G Pro X, a moderately-sized gaming headset.…
I needed a very strong basket to hold various things like LIPO Battery and oil, spray bottle, etc.
Golf tee 55.4mm / 2.18", no support needed Based on the dimensions in the images, changed the hole for the ball in such a way you dont need support. I printed mine vertical without brim aswell. If you like this model, please download and…
A minimal tape dispenser/roller for Scotch tape (for rolls with an internal diameter of 25mm, external diameter up to 55mm). Uses a piace of blade cut from a cling-film (or other kitchenware) roll, cut to a length of 20mm. Can be used…
I am going away for the next couple of years, so I wasn't able to make an assembly guide and a gameplay video like I normally do. In addition to the 3D printed parts, you'll need to buy the following: 1 - Some of this pipe to make the…
This print allows for an O11 Dynamic XL case to be lifted 55mm of the ground. It fits over the existing feet without modifications. The design of the feet allows for just printing the design four times without mirroring. Printed with 20%…
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 55mm Bore diameter: 4mm Pitch: 50mm Height: 16,2mm & 19mm Type: DriveDog 3,7mm
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
Hello All, This is an insert for my rugged box deburring tool case here: https://www.printables.com/model/551996-deburring-tool-case-150mm-afa-tooling-rugged-box-s I noticed there were a few folks who were cutting or modifying the insert…
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
Lens cap for lenses with a 55mm thread. Designed in Fusion 360. Design files included. Works really well on my camera. Prints in 3 parts. The clips slot into the body. Stretch the spring out a bit and take your time putting it together.…
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…
A small box for electronics projects with 6mm diameter wire holes on each end. The top and bottom friction fit together so no glue is required. Outside dimensions: 55mm x 35mm x 14mm Inside dimensions: 52.5mm x 32.5mm x 11mm
Holder for paper used in espresso making. Comes in two sizes one for 55mm paper and another for 58mm paper and two heights. Update 8/18/2023: added holder for 58mm paper and taller options
This is a very easy 155mm clamp to hold down your workpiece on your CNC spoilboard. I use this with the T-track system from Incra, but compatible with many different clamping solutions.
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Not much to it. It clamps onto your desk or table up to 55mm thick. Remix of the original by JohnMartin
Printed it at 0.2 and 60% infill. Took me 1h21 on Ender 2 V2. I used eSun matte pink filament. It nearly matches the pink of the mic.
A simple filter to adapt 49mm lens filter to 55mm lenses. Threads are 49x0.75 and 55x0.75. Avoid tightening the filters too much, it might be difficult to remove after (remove the 49mm filter first or use the handle version). Print at…
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print result for overhangs. See…
Front lens cover for the 1977 Minolta MD Rokkor 50mm 1:1.7 with a filter diameter of 55mm. When you're thrifting vintage lenses, it's not uncommon to find lenses for sale without a front cover, a back cover, or both. I recently found…
I needed a slightly bigger inside diameter to house a larger bottle. In my case it was a 3DLac aerosol can with a 2-1/16" diameter. MKE Dan's models looked great so I remixed it to be a bit taller, and with a 55mm inside diameter. I…
0,1mm thinner pins on the jaw for a better fit
I designed this Sample Card in a Business Card Size. The Fusion360 model is customizable.
Still trying which Material and setting is best. First ones made of PLA work pretty good since around 2 month but looked a bit rough on the surface as you can see on the picture of the first prototype.
Ring for 55mm cardboard spool (cardboard thickness up to 4.1mm) - fit for creality Hyper PLA, Polymaker PolyTerra and many more inner diameter of the spool ring 51.7mm so most of silica gel spool container still fit (like…
NEW Version. Cosmetic cleanup and sligthly better modelled. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may have to experiment with…
Spool adapter, that fits about 75mm/71mm spools down to 55mm inside diameter. This is a solid model but you can print with 10% infill for great strength and reducing unnecessary fill. I printed with no top or bottom skin and adaptive fill…
The standard holder from https://www.ebay.nl/itm/Universal-Mobile-Phone-Adapter-Holder-Mount-Telescope-Binocular-Spotting-Scope/222674716928 doesn't fit on a 55mm Swarovski eyepiece. Therefore I've designed a fitting part. In the picture…
This is parts for 110x55mm rectangle ventilation tubes. See also other 110x55 parts https://www.printables.com/model/840511-rectangle-ventilation-110x55mm-angle-90-degree-upr And a 90 degree horizontal to verticla twist module…
This model has a long history, beginning as a simple clip for USB drives. After some iterations, I redesigned it to follow the design rules of crane hooks. A crane hook is designed as a cross-section with the same tension according to the…
If you want to see my best projects, I invite you here: https://cults3d.com/en/users/Guliwer06/3d-models Diameter = 55mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: Yes Infill: 15% Filament: Colorfil PLA…
Ikea Skadis Cotton Pads Holder (up to 55mm)
I made this adaptors for slides and negatives for my Sigma Macro lens that has a filter thread of 55mm needs uniform light (I simply point to a white wall well illuminated and far enough to be out of focus) printed on PLA at 0.2 Created…
Extension of the milling machine for cutting foils There are 3 versions available One suitable for the 3018 CNC series and one for use of 500W spindle motors with a diameter of 55mm. Now a long version is also available when the Z-axis is…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm
This is remixe of @addohm_141025 's Wall mounted build plate holder. I modified it for 355mm and 350mm build plates. There are two versions. V2 have more stability but needs some more filament. CAD at onshape…
95A TPU settings, 235C Noz. 60C Bed, 15mms print speed, no retraction, no support, 50% fan or more. built plate adhesion is 7 lines of brim everywhere. Play safe.
One piece wheel and tire for drifting. 1/18 scale to fit on Traxxas' LaTrax or similar models (like Tamiya M series ) . It prints fine with a 0.2mm layer height. Achieve best results by printing the wheel face up with black material. No…
I've been using the inexpensive but rather nice Genmitsu magnetic dust shoe on my DIY CNC router with a 500w 52mm spindle. I recently overhauled and built a new improved (is it new or improved, can't really be both) and due to the…
Needed an adapter to be able to use Printalot filament up that I had. Just a basic, simple thing. Sharing under public domain, use it as you see fit.
A small adapter to get a 55mm HomematicIP thermostat, or any other HomematicIP 55mm device, attached to IKEA Skadis. The fit is not as tight as with the original one, could probably add additional spacing to the clips, but it holds it in…
This Lens cap is designed to be printed without supports at 0.15mm layerheight and has some tight tolerances so the locking mechanism most likely has to be broken loose wich is best done by carefully bending the parts in different…
Keep your lens cap safe and always at hand. This is a lightweight and durable holder designed specifically for the Nikon D3400 (or any lens with a 55mm cap ), allowing you to clip it directly onto your camera strap. No more stuffing the…
Design idea - not tested - maybe in future.
58mm (Female) to 55mm (Male) Step Up Ring for attaching a 58mm filter to a 55mm lens. Used Ratasich's model for the 55mm threads and ThespianMasks' model for the 58mm threads. Made 2 models: No grip (just round) Grip (for ease of…
Give your space a sleek, modern, and industrial vibe with this minimalist cube lamp! 🖤✨ Perfect for desks, nightstands, or shelves, this design adds a unique touch to any room. 🔹 Designed for an E27 socket (55mm diameter) – The hole for…
This is a set of 55mm compatible blindplates, switchplates and various mounts to integrate in your existing switchplates. The frontplates all clip into a springed backplate that is also printed (InsertSpring). The backplate itself is…
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may…
6.5X55mm Swedish stacking loading block. Category: Tool Holders & Boxes
I designed this cap with some specific intentions in mind, I wanted it to cover the entire lens face, filter ring and all, like a sheath, and I wanted it to be the "spring-loaded" pinch-on style. I had a couple lenses that I was…
I created a chamfered version of the hook for the HCW. I had issues printing the hook with a radius corner. This hook prints with no issues.
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…
HATCHBOX Revolver Spool Adapter for 3D Printer Accessories. Designed to enhance compatibility, the HATCHBOX Revolver Spool Adapter reduces the size of the hole on our new spools, making them suitable for accessories like the AMS LITE,…
Print info: Material: ASA, ABS Layer: 0.1-0.2mm Perimeters: 3 Infill: ~30% Support: No
This is kickstand mount for Nami Burn-E if you change suspension from 165 mm -> 150/155 mm. You need: 1) Woom 1+-3 kickstand for kids bike for 150mm, Woom 2-3 kickstand for 155mm 2) M5 inner threads 3) M5 screws
A tamp for compacting coffee in the ladle of a Espresso Maker/Machine, for 55mm diameter ladle.
Dose zum schrauben für Fotofilter mit 55 mm Durchmesser. Die Dose hat innen einen Durchmesser von 60 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
A (print in place) hinge constructed with a 55mm barrel made of 9 knuckles on a 6mm diameter pivot. Bridges are 5mm max and tolerances are 0.4mm for all swept surfaces so should be fine on most printers. Includes a backing plate if the…
New version. Smaller cosmetic changes for a nicer look. and easier print. These models are parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. See also…
This is simply a rounded or domed center cap with the VW logo. Measure your existing center cap and scale accordingly, or add as a logo to your full center cap 3D design.
Filament spool adapter 55mm - 36mm (Formfutura > Sovol sv06). Only 3.6g.
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. The model is available in two versions (male/female or inner/outer fit). Please note you can…
This spool hub was created from measurements of a printed original part. It fits Overture and Polymaker spools that are 55mm, but I also included the model file with user parameters so that it can be made to fit any size spool. Modify the…
Printed in white ABS and acetone vapor smoothed to prevent coffee grounds from sticking.
I printed this at 0.1mm layer height since the filter threads are a 0.75mm pitch, best use as low as you can get and print at a slower speed. The fit is a bit loose until it's tightened down, but it's not going anywhere once in place. You…
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. The model is available in two versions (male/female or inner/outer fit). Please note you can…
Initially, I drew a durable and convenient glasses case, but it can be used as a container for small items. Internal case dimensions: diameter 33 mm and length 155 mm. First change I added another version of the body half, making it a…
Scheared a while for the perfect gridfinity compatible spool holder. I like this one the most. I prefer the 18mm shaft. But if it doesn't fit, I added the 13mm one from the original design. The holder is also really handy if you don't use…
For best results adapter should be 3D printed in resin. Max resolution if it is printed on FDM printer, 100% infill.
This 3D model is a leg raiser for the Ender 5 Plus, increasing leg height to 55 mm and ensuring compatibility with V-slot 2020 profiles. Designed to work seamlessly with the Ender 5 Plus, it utilizes the printer's existing V-slot 2020…
I was looking for a way to rise my printer, I have a lack enclosure that sits on top of another lack table but the printer was to low for me to work on it so I made these extenders. I personally use the 155mm extender on top of some…
110x55mm ventilation duct wall fasteners and one for 2020 alu V-profile. One of the models require a M3 nut to be inserted together with a hex 16-20mm SHCS (hex socket head cap screw). See also other 100mm and 110x55mm ventilation parts…
Check valve for a compressor model to insert into the discharge cooler. Fits into the 55.5mm inside diameter of the cooler. Printing: Separte the 3 parts to put onto buit plate no supprts are needed, but surface finish might improve upon…
6.5X55mm Swedish Vase Mode stacking loading block. Revision History: 05/14/2023 - Fixed *-50 and -25 slot cut into lip. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. These models are 3-way links for rectangle ventilation duct 110x55mm If you need a mirrored…
I created a modern tea light candle that flips over and serves as another when the other side is either stuck or dirty.
Limbered version of Windham Graves ' excellent M1918 155mm Howitzer (known as the 155C mle 1917 in French service) in both horse-draw and motorised versions. The gun barrel was separated from the cradle and moved to its travel position.…
Cartesian X axis model for all different rod distances. Carriage-VRN Used for modding the Stealthburner hotend onto cartesian printers like the prusa i3 and it's clones. Different rod distances included: 45mm, 50mm, 55mm Files named…
Design Objectives I liked the idea of the basket weave desiccant containers, so this container is an iteration on that design. Large capacity for big dry boxes. The container is 83mm (diameter) by 156mm (height) and can hold 500 grams of…
Ich habe Bewegungsmelder und Thermostate von Homematic (IP), welche 55mm breit sind. Unser Schalter Programm Busch Jäger Future Linear hat aber aussparungen von 64mm. Also habe ich mir diese Dinger hier gebaut, um die Zwischenräume zu…
Made for 55mm or 3 cup models, it is the inner diameter of the coffee holder. Scale up or down from there within slicer to suit your needs. Scale it down for espresso machine use. DESIGNED FOR VASE MODE 0.8mm nozzle EXTREMELY FAST PRINT -…
Simple guides to help with marking 55mm plaster cornice.
Seestar S50 Solar ICE CO 55mm ND100000 MC Glass Filter holder for the Solar Eclipse. The glass filter is a force-fit. However it is easy removal from the Seestar for totality.
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print and result with overhangs.…
Just another funnel for the Bialetti Moka induction. 😊 The coffee funnel is a practical accessory designed for Bialetti Moka Induction coffee makers. Key features: 55 mm Inner Diameter : This funnel is specifically crafted to fit the…
An ergonomic version on my 55mm Coffee Stamp. .STEP and .f3d Files also includer for customisation :)
remixed the original to now accept 155mm OD spools
I designed this nozzle to fit between the wall and the window, in such a way that when the window is open the nozzle directs the air out of the window. It fits a 110x55mm ventilation tube. Category: Kitchen & Dining
Filament used: 4.2m to 4.5m (13.77ft to 14.76ft) - approx 12.5g-14g depending on filament used. Because it's such a small part it should print in any material your printer's nozzle and bed can handle - very minimal bridging required. This…
This is parts for 110x55mm rectangle ventilation ducts. To be used connecting two ducts with a magnetic coupling for easy parting. On the image below, wall mounted duct is connected to a duct mounted to the backside of a Voron 2.4…
How to apply: https://youtu.be/rttDUTjGOFU Print Settings Printer: Craftbot + Rafts: No Supports: No Layer height: 0.2mm Filament: Any
