1 / 2
Bicycle seat bag mount for Bontrager Flare tail light — image 1
1 / 2

Bicycle seat bag mount for Bontrager Flare tail light

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clip to attach a Bontrager Flare RT to a loop on the back of a saddle bag. Adapts the stock mounting block.

Rating
5 / 5
Likes
13
Downloads
153
Makes
1
Views
1,100
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Clip to mount a Bontrager Flare RT (or any Flare I believe) tail light to the loop on the back of a saddle bag.  It uses the mounting block that comes with the light.  Pry the rubber seat post loop off of the mounting block.  The block slides into the guides on the back of the clip with whatever orientation you want for the release tab.

There are two ways to secure the block to this clip:

  1. Using a 6 mm long M5 button head cap screw
  2. Using a pair of wire ties that also go around the saddle bag loop.  There are holes and slots for the ties to go through.

If you are moving the light between bags, you will want to use the screw, probably with some thread locker on it to make sure.  If you have it fixed on one bag, then putting the wire ties around the whole thing keeps the block in guides and makes sure the clip will not come off the saddle bag loop, as shown in the pictures.  I also have the M5 screw in place, because I over build everything.

Thanks to @jerry777 for the original design of this clip.

2025-4-19 update:  Added a 25 degree tilted version for situations like mine that your seat bag points downward.  Use the 5 mm screw in any case as the wire ties don't trap the mount block as well in this design.

Printing:

Filament PETG (for outside UV stability and strength, PLA not recommended)

Layer height: 0.2mm

Infill: 40% or so for strength

Orientation: print on side (slot vertical)

Supports: under the ends of the block guides only

Tags