Space Shuttle - Easy to print
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.24 net (excluding VAT)
For file: 0.24mm.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.22 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 15 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy and fast to print Space Shuttle. No supports required, no overhangs,.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 3
- Views
- 278
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — NoDerivatives
Description
Easy and fast to print Space Shuttle. Designed during our astronomy classes included in our STEM learning programs. It has a keychain on top that can help you add the model to your keys. The keychain was designed taking into consideration that we want every key to fit in the hole.
Model Details
The model was designed in Blender and it is made without having any overhangs or parts requiring support.
Printing
Using EasyPrint filament we used the following settings:
- Nozzle: 195C
- Bed: 60C
- Infill: 15%
- Supports: No
- Layer height: 0.16mm (can be printed with any layer height though)
Using Real3D filament we used the following settings:
- Nozzle: 205C
- Bed: 45C
- Infill: 15%
- Supports: No
- Layer height: 0.16mm (can be printed with any layer height though)
In both cases, printing took approximately:
- 0.24mm layer height: 23 minutes
- 0.2mm layer height: 29 minutes
- 0.16mm layer height: 36 minutes