1 / 2
ELRS TCXO EP1 DUAL MOUNT
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The holes are 6.1mm in diameter. The distance between the holes is 25mm, and the height is 2mm.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 103
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
The holes are 6.1mm in diameter. The distance between the holes is 25mm, and the height is 2mm. It is a build for the Mr. Croc frame, but it can also be used for other frames.
Please print it using TPU filament !!!!
I did in Ender 3s1 and slice it using Cura.
The design was created in Onshape."
print settings :
0.2
tpu
speed 50ms
If you have any further questions or need additional assistance, feel free to ask!