FLSUN Super Racer (SR) USB side lights holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An holder to have practical USB light sticks on the side columns of the SR.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Practical, easy.
I already put a “selfie led circle” on the top of the printer but that wasn't enough light for my uses. Then i discovered those nice USB led strips, so i did some holders for them to put on the inner sides (left and right) of the SR columns.
You will need 2 USB led sticks (they are avaiable in the formats i show in the picture, but i strongly advise you to get the “medium” ones), you can get them in cold or warm white.
Then, 2 female USB A connectors (only +5v and GND).
Or course you will also need to provide 5 volts to the led sticks, so a buck converter, some cables and soldering skills are mandatory.
Maybe an on/off switch (to put in the rail between the 24V and the buck converter) will be useful.
If you don't know what you're doing, don't do anything: i take no responsability for any damages you can get.
The model can be printed without any support, PLA or PLA+ (or whatever) with minimal infill; just print 2 of them, slide the USB connector in them and put them in place (just insert them in the rails with a 30° angle then rotate them to be flat on the printer, they will stick in place in a firm way).