1 / 5
Skådis / Skadis - Pliers and Cross Cuts Holder — image 1
1 / 5

Skådis / Skadis - Pliers and Cross Cuts Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Skadis mountable holder for Pliers or Cross Cuts (or anything else that fits).

Rating
4.571 / 5
Likes
45
Downloads
349
Makes
9
Views
1,231
Reviews
7

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Use with Ikea Skadis system and T-Clips to mount (see remix section).

Be sure to print a T-Clip to go along with this model.

Should be usable with most Pliers and Cross Cuts (or anything else with a similar shape between the handles).

After inserting the T-Clip fully, turn the printed model on its side, attach it to the Skadis board, and rotate clockwise 90° or until the printed model is in the correct orientation. Do not overtighten the model or the T-Clip might bend/break. If so, simply print a replacement T-Clip.

To remove, turn the printed model counterclockwise 90° and pull outward.

Tags