1 / 3
Press Lube Packer for LM20UU 20mm Linear Bearings — image 1
1 / 3

Press Lube Packer for LM20UU 20mm Linear Bearings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A two-piece pressing grease/lube packer for LM20UU, an easy and efficient way to pack these big bearings.

Rating
0 / 5
Likes
7
Downloads
18
Makes
0
Views
441
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

    I needed a way to lube my new bearings, and hopefully without making a huge mess and wasting allot of lube. 

    So, I made this with the idea that if I had two solid parts that pressed together. I wouldn't waste any leftover lube inside the printed part. and you could get a much higher pressure than you could with squeezing a tube.

 

    Usage Directions.

  1. All you need to do is put one of the pieces into the bearing and then set it down, printed part down, onto a flat surface. 
  2. Put some lube into the center of the bearing, you can repeat this process multiple times so you can start will a little bit of lube if you dont know how much you need.
  3. Then insert the second piece into the bearing from above and press down intil some of the lube starts to leak out of the bearing. Repeat step 2 if you go all the way down without any leakage. 

Tags