Hinge set for Ikea Billy bookcases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinges skinny enough to fit on Billy bookcase shelves. Additional magnet and door handle added too
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 24
- Makes
- 0
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
I'm sick of dust getting into my bookcases, so I installed acrylic sheet doors on them to keep it out. I've added the handle and magnet holder files I used to keep the doors shut.
Hinges- 0.2mm layer height, 0.4mm nozzle, 50% infill, include all supports. Be careful when removing supports, because the barrel can snap during removal. The holes are meant for M5 screws!
Handle + magnet holder- 0.2mm layer height, 0.4mm nozzle, 10% infill, no supports needed (you can print these with any settings, they're not structural)
The magnets I modelled these for are 15x5mm.
The distance between Billy bookcase walls is ~36cm. I suggest designing acrylic doors that extend slightly below the lower shelf.