Velcro Cable Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small and filament efficient cable holder for use with 10mm wide velcro.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 1
- Views
- 323
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small and filament efficient cable holder designed to be used with 10mm wide hook-and-loop straps. Works well under desks and behind shelves.
The holder is roughly 77mm long, 17mm wide and 4mm thick at the ends. The screw holes are designed to be used with 4mm pan head screws, however slightly larger and/or slightly smaller screws, as well as double sided sticky tape, will work. The model should be able to scale to accept wider velcro straps.
Each unit is designed to be used with a 200mm long strap of 10mm wide velcro and two 4mm pan head screws. Make sure to insert the hook-and-loop strap before mounting the unit.
Recommended slicer settings:
- Print in the orientation provided in the STL file
- Supports enabled
- 0.2mm layer height