Gainsborough Privacy Door Latch keeper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to fix the Gainsborough door lever sets with the privacy option, they tend to rotate over time, this stops that.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v2.0
This is to fix the Gainsborough door lever sets with the privacy option, they tend to rotate over time due to poor design which leaves the lever essentially free floating inside the door and the privacy lock non functional, this stops that.
The device is inserted inside the door cutout and will grip the latch tightly allowing no rotation, the screws holding the levers together then can only sit in the cutouts and wont be able to rotate off axis.
The print is 49mm wide, it worked in all the doors in my house which had the privacy lock.
I printed these with 0.14mm layers took about 90 mins each. 15% Infill, very strong.
My exact door lever set:
Gainsborough Florence Privacy Lever Set. I assume it will work for other similar Gainsborough leversets with a similar privacy design.
https://www.gainsboroughhardware.com.au/en/products/115FLO.html
Edit - Ive uploaded a new file which should fit the leversets which are black. They have a slightly different screw hole which is wider.
TradePro Square Rose Bela Passage Lever Set
https://www.gainsboroughhardware.com.au/en/products/1400PROSQBEL.html