DigiComp I Logic and Clock Tubes, Wire Jig, Slider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Logic and Clock tubes for original DigiComp I plastic computer. Also: a jig for making more vertical rods, and a slider
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These tubes fit the logic and clock tabs of the DigiComp I plastic computer. They're used to program it.
I printed with white PLA.
Note that the clock and logic tabs on the DigiComp I flip-flops appear to be a little non-uniform in size, and my replacement logic and clock tubes are not as compliant as the original thick-wall plastic "straws" on the original. This means you may have to fiddle with them a bit, and pick the best-fit tube for a tab when programming.
The horizontal logic tube is designed to be printed laying down without support.
The wire jig is for bending more clock rods and logic rods, a crank, and the vertical pin that holds the whole machine together.
The slider is for printing spares of the sliders that run across the top of the machine. It's a simple single slider - not the double “OR” slider.