Barrina LED Grow Light TPU Storage Caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a bunch of these Barrina grow lights from Amazon, and needed a way to store them.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 23
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of caps that let you store Barrina LED grow lights in stacks of 2, 4 and 6. They will work for both the 2 and 4-foot models. They go by other names as well.
Here's are the lights on Amazon: https://www.amazon.ca/Barrina-Spectrum-V-Shape-Reflector-Linkable/dp/B07QWV1THV
They're printed in TPU, with one perimeter and no infill. This allows flexibility and grip without binding, although it's also fine with regular parameters and infill but the ends might bulge a bit. You'll need to print a regular and reverse cap each.
If you print in a hard plastic I'd scale the X and Y up by a few percent as they were made to be snug with 98A TPU.
I set the bottom to a 20% honeycomb pattern with a modifier for filament savings and a neat look.
I also have a set of caps for the SZHLUX 40W LED Grow Lights:
https://www.printables.com/model/538841-szhlux-40w-pyramid-led-grow-light-storage-caps