Skadis Back Mount for Ikea Bror System Longer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of @PacoSebas_548699, longer mounts to hang Skadis 36x56 in side of Bror 55 deep case.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 48
- Makes
- 0
- Views
- 1,115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I used @PacoSebas_548699 excellent mounts to put a 76x56 Skadis in the back of my 85x55 Bror case. I also wanted to have the narrower 36x56 in the side of it, however that obviously wouldn't fit (too much space to bridge). So I remixed his mount to create a longer version of them. This will mount the Skadis close to one of the legs of the case. I preferred that over centering them. You will still need 2 of the opposite mounts from PacoSebas' design!
Printed them with a decent amount of infill (40%) though that might be overkill. I have no experience yet with how strong they end up being after being subjected to some load.
As with PacoSebas' version, use inserts. Make sure you put the inserts in the ‘back’ of the mounts, so when you screw in the bolt you're pulling them into the material of the mount, rather than out of it.