1 / 6
Now Spinning Vinyl Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take on a "now spinning" vinyl wall mount.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 123
- Makes
- 0
- Views
- 738
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
This model does not require supports when you print the f(r)ont facing the build plate (see third photo). The model already contains supports for the tips of the S and the G. Use a crafting knife to remove them.
If you don't trust double-sided adhesive tape, also remove the single bridging layer at the screw holes and use two 3x35 mm countersunk screws and 5x25 mm anchors (last photo). The distance between the holes is 148.1 mm.