1 / 2
Tumbler vent hose adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two part adapter for a ~103mm tumbler vent to ~90mm hose
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 22
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Two part adapter for a ~103mm tumbler vent to ~90mm hose.
- Attach the hose using a clamp from your local hardware store on the hose adapter.
- Attach both adapter parts using the supplied adapter clamps (optional). The clamps are not intended to be removed, so you can also use eg. zip ties.
- If the vent adapter is not long enough/sliding out, you can create some small bumps using a glue gun or just glue the vent adapter to the tumbler directly.
Print settings:
- 20% infill
- 0.24mm layer height
- PLA