Battery charger for CRC123A RC123A using TP4056 module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 42
- Makes
- 0
- Views
- 405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module.
I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an 18650 module. The module and springs were hot glued.
I stripped the wire to fit through the holes, just to make it more compact and keep the wire flush to the bottom.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament: eSun PETG Purple
Notes:
I used PETG but PLA would be fine too. Used 10% infill to give the base a bit of rigidity
Category: Electronics