1 / 1
Newbee 4GS motor spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer goes between Newbee 4GS gear drive and Reacher/SKP/Radium motors, preventing pinion gear from contacting cover.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This spacer goes between the Newbee 4GS motor mount plate and the motor and prevents the pinion gear from contacting the inside of the gear drive cover when using Reacher/SkyartPower/Radium motors.
I recommend setting the Z height of the part around 1.4-2mm. I think I personally used something like 1.4mm.
5 wall loops
100% infill
USE HIGH TEMP RESISTANT FILAMENT, NOT PLA. Use CF-PETG at a minimum. Preferably something that has a HTD of 100*C+