65 models
Updates These are the changes I made to the instructions: I changed the part numbering to match the part splits. I added some steps for the new parts needing glued together and pushing out the deliberate support in the mouth of the body.…
I designed this front plate to house my Synology DS 920+ at the bottom of my RackMate T1. Included Keystone and non-Keystone versions. After a few failed prototypes (RIP my filament), I finally got the measurements right. The DS920 is…
Since I have limited devices, I needed to fill the empty space with a 1U blank plate. It was a practical solution that worked well for me. 3D Printer: Bambo P1S 0.4 nozzle PLA Basic Black
Nothing special; Just for convenience I removed the text on the insert plate for the user to customize via the slicer. Saving a few seconds of time making a blank one yourself ;) *All credit goes to lowlandet for their design and…
3D Printed 10" Network Rack Mount for Dual Raspberry Pi's As part of my classroom network setup project, I’m building 10" 3D-printed racks for my students. They'll be configuring and testing real-world networks, gaining hands-on…
2U 10-inch Rack Blankplate
This is basic 10" rack mount for four Raspberry Pi's. It's compatible with Pi 3/4/5. This setup should give you enough room to add a top hat without modification (such as an NVME hat on top). There is a small thumb grip on the inserts to…
CoreXY mouse tester. Bom attached. Uses GRBL and a RAMPS for control.
The goal of this project was to create a 1RU Chassis for a DeskPi Super6C Cluster, and the ability to add the new Turning Pi 2.5 later down the road side-by-side. The current sub-assemblies include the following designs: - Short Rack Ear…
Split into four parts per mount, so getting the alignment for the rubber feet right is a bit tricky. Use the included guide.mf3 part to get the spacing right. Pretty specific measurements, but will work for the MS-A1 too. I printed these…
This was designed to house my Synology DS 418 at the bottom of my RackMate T1. It may be possible to install this solution at other positions but this was not my intent. Same goes for other models of Synology NAS units. In my case…
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP ProDesk 600 G1 computer case. Multiple adaptors could be stacked and screwed together to fit multiple 2.5" HDDs into a single…
This is a mount for the Tripp Lite BC600R UPS so that it can be mounted in the bottom of the DeskPi RackMate T0 or T1 server rack. This UPS is the perfect size for the RackMate T0/1 and provides up to 300W of power for small form factor…
This is a replacement to the top acrylic for a RackMate T2 10" rack. This recreation has 27 lines of vents versus the 25 that are on the acrylic. Everything else matches well. Did you enjoy this model? Help support me with a tip:…
I recently started using the Deskpi Pro with multiple raspberry pi 4's. I have found that the factory metal case greatly restricts the wifi signal of the raspberry pi. I have been testing this case in petg and pla and found it to correct…
**The Vtr_pcb files are only to mount support don't print them*** This is the evolution of the first Desk. I use a nozzle of 0.4 on my Neptune4, pay attenction to have the right extrusion to respect the tollerance. wood panels: 1 (central…
Convert original model STL to DXF to be used with laser cutter.
This is a replacement to the side acrylic for a RackMate T2 10" rack with Skadis holes. You'll need to print: 1x Top 2x Middle 1x Bottom Between the slats are filament-sized holes, 10mm long, that you can place filament in for alignment…
This is just an additional plate for the Raspberry Pi 5 for the 10" rackmount. You can download my faceplate remix here: https://www.printables.com/model/1445643-10-rack-mount-for-dual-raspberry-pis-larger-openin The rack faceplate from…
This is a replacement to the side acrylic for a RackMate T1 10" rack with Skadis holes. You'll need to print: 1x Top 1x Bottom Between the slats are filament-sized holes, 10mm long, that you can place filament in for alignment pegs. The…
WILL PROBABLY NOT WORK ON OTHER RACKS OTHER THAN THE RACKMATE T2 UNLESS YOUR SPACING BETWEEN BACK AND FRONT IS 10 1/4 INCHES OR 260.35MM PCIE CARDS WILL NOT FIT WITH BRACKET INSTALLED V1: Release V2: Changed back cutout to not block…
I needed to set my Firewalla Gold Pro back in my DeskPI 8u Mini Rack, due to their metal bar that takes up the last ⅓ of a U. I added a 5.5mm cut out and placed the holes so the whole unit sits back a few MM. All ports are still active…
In the box of a Rackmate T0/T1 you get an acrylic top. This recreation has 27 lines of vents versus the 25 that are on the acrylic. Everything else matches well. I use PETG with 30% infill. Did you enjoy this model? Help support me with a…
Got a Raspberry Pi 4 and a DeskPi KL-P24? Let's make a sweet drawer! Bill of Materials: I have listed everything needed, but feel free to substitute with items you may already own. Raspberry Pi 4 Suitable power source DeskPi KL-P24:…
Got a Raspberry Pi 5 and a DeskPi KL-P24? Let's make a sweet drawer! Bill of Materials: I have listed everything needed, but feel free to substitute with items you may already own. Raspberry Pi 5 Raspberry Pi 5 Active Cooler Fan Heatsink:…
DeskPi RackMate: https://deskpi.com/products/deskpi-rackmate-t1-2
The stock fans in the DeskPi Super6C case are very loud. These stock fans can be replaced with 40mm Noctua low-noise fans. However, the same screws that mount the stock fans are smaller than the mounting holes on the Noctua fans. A…
This is a replacement to the side acrylic for a DeskPi RackMate T0 10" rack with Skadis holes. The holes help with ventilation and allows you to hang items on the side. Look up IKEA Skadis for more information. Did you enjoy this model?…
A simple 10" rack mount for the Asus QG-U1080 2.5g Switch, I've used it in a deskpi rack. There are two pieces, the backing plate is to ensure the router does not move when plugging things in. The backing is secured with 2 x M3 bolts, I…
Raspberry Pi vertical shelves for DeskPi 10-inch DIY 2U Rack Mount Pi5 tray for largish POE + full-size NVMe HAT Pi4 trays with or without switch Plain Pi B+ tray “DeskPi 10-inch DIY 2U Rack Mount” has vertical hole spacing -> 74 mm…
I made a small, rack-mountable holder for the included tools from the DeskPi RackMate T2 kit. I didn't feel like keeping the box anymore for the extra pieces so I made this incase I ever need them. I probably won't, but I know I will if I…
Made 2 varients, one with horizontal rings and the other with a hexagon pattern. Idea from CNC Kitchen
The clip was designed with these constraints in mind: My desk is 19mm thick The ruler is 29mm wide My deskpad has a metal plate underneath the faux leather so it holds the clip firmly without bumps on the surface – which may not be the…
The 80mm and 3x40mm version only differ on the “Top” and “Tophat”, The other parts are the same. The holes are all sized to tap with an M3 bolt (to save hardware), except the DIN rail mounts that are sized for the M3 heatsets. I used a…
Ran out of bags to store these in and rubber bands create a crease in the mat. Choose according to the thickness of your deskmat. Print in vase mode. Set no top and bot layer if you want a sleeve to go in the middle.
The TL1 ships with an open top. Anything warm in the rack dumps its heat straight up into the room, and dust drops straight back in. This is a cover for that opening with a mount for a 140mm fan. I could not find anything made for the…
This is to hold/protect pins on the DeskPi PicoMate prototyping board for Pi Pico/W. I printed mine on a Mk3S+ with 0.6 mm nozzle at 0.4 mm layer height and 25% infill. PETG is my goto, so I don't know how thermal shrink may affect other…
These mounts allow you to attach a SideTrak mobile display to the top of your deskpro
These are 3D-printed anti-slip retainer clips designed to prevent a Synology DS923+ from sliding inside a DeskPi Rackmate T1 mini rack. The clips act as mechanical stops at the front and rear of the NAS, keeping it securely positioned…
Replacement handle for the GeeekPi DeskPi RackMate T1. Slightly shorter than stock, for additional clearance. Print your own to customize color or material. PLA is more than sufficient structurally. Printed on side, with no supports.…
My original Compaq drive rails were missing, so I reverse-engineered and recreated a replacement set. These rails allow standard 5.25" drives to be mounted using the original Compaq sliding rail system. Tested successfully with a Compaq…
4in Photo Stand made for display on a desk.
Support Micro Center and Inland Filament with this @InlandFilament Deskplate Printed with Bambu Lab X1-C
Before you download my 3D print, please check the dimensions with your DeskPi Pro V2.0 case twice. I can't answer whether the cover also fits the DeskPi Pro V3.0 case ... I don't have one. Front cover dimensions: Length: 149.50mm Width:…
Deskpeggy is the other pegboard. You can, of course, hang Deskpeggy on the wall or something. But the great thing about Deskpeggy is that you can also simply place it on your desk, (work) table, or in the bathroom (and more). The…
Moving from an underutilized 19" inches to a 10" inch rack, I needed something to move my ITX board to, and decided to go with the metal rigidity of the DeskPi ITX shelf rather than the fully 3D printed ones. What it lacked was something…
The pen holder is perfectly integrated into the desk surface, attached by magnets and flexibly interchangeable. 👉 Desk platform: https://www.printables.com/model/1026879-desk-platform
The docking station is perfectly integrated into the desk surface, attached by magnets and flexibly interchangeable. Docking station (Amazon) 👉 Desk platform
AVlabs AV-DESKPEN MK I Pen Holder W… What? What's this? Meh, it's just a thing to hold my pens under my monitor, and not have them laying everywhere on my desk. It uses the same “mechanism” as the AV-DESKOSD and AV-DESKKBLED. Hinge with…
Updated for more airflow and for using M2.5 heat-set threaded inserts. STEP & STL included.
I like using DeskPi shelves for heavy or hot components of my 10 inch rack, what I don't like is seeing them. This makes a miniITX shelf and motherboard look nice and tidy, and has an indent on the lower U to sit flush when installed over…
Sipeed NanoCluster DeskPi Rackmate 10 inch Rack Mount 2U
Updated for more airflow and for using M2.5 heat-set threaded inserts. STEP/STL
DeskPi RackMate T1 RGB LED Bar clip Fits a 3PIN Led Strip Rigid Bar 33cm https://s.click.aliexpress.com/e/_mtBJoC5 which can be controled using WLED. One is enough to hold the LED bar.
I designed and printed these rack mounts for the desk pi rack mate tt utilizing RPI and some other stuff I had laying around it has RPI zero 2w, RPI 3b+ and a raspberry pi 5 8gb... netgear network switch and an old 1tb external HDD I use…
Hello! THIS IS A EXTREMELY EARLY PROTOTYPE Originally I wanted to make a simple desktop tool part organizer for myself, but then remembered that I had this project in the back of my mind so I decided to kill two birds with one stone. Even…
My original Compaq hard drive mounting frame was missing, so I reverse-engineered and recreated a replacement. This frame allows a standard hard drive to be mounted using the original Compaq mounting system. Tested successfully in my own…
This project is a storage tube for deskpads with maximum height of 300mm . I tested it with a deskpad size 300x700x2 and it had room to spare so I assume that 300x800x2 would also fit. Files There are four files, three stl files and one…
My original Compaq front cover was damaged, so I reverse-engineered and recreated a replacement. This cover is designed to fit the original Compaq mounting system and includes the characteristic guide rails and mounting tabs. Tested…
I made a small, rack-mountable holder for the included tools from the DeskPi RackMate T2 kit. I didn't feel like keeping the box anymore for the extra pieces so I made this incase I ever need them. I probably won't, but I know I will if I…
Sipeed NanoCluster DeskPi Rackmate 10 inch Rack Mount 2U
🦸♂ The MaskPool: chaos incarnate When Deadpool finds Loki’s Mask , the result is… The MaskPool , the craziest character in the entire multiverse! He’s got the style of Deadpool’s suit , but with the iconic colors of The Mask : bright…
Simple 1U case for the DeskPi Super6c cluster board. Easy print. No supports required. Prints in any material. I printed in PLA. Requires 8 small M3 heat-set inserts. Make sure they are 4mm or less in total diameter. Designed to hold 3…
This is a replacement front face plate for the DeskPi Pro case with a cutout for a FFC Pi Camera cable. This is a drop in replacement for the existing face plate allowing you to route the camera cable from inside the case, over the USB…
A remix of ModernGnome 's great little Gecko model (it's no longer there?) to be used as a fridge magnet. One of my kids loves putting things on the fridge, and loves my super strong neodymium magnets, and loves 3D printing, so I combined…
![RackSlide Raspberry Pi 4 Drawer with DeskPi KL-P24 [with optional OLED]](https://media.printables.com/media/prints/298cb512-6f51-46c1-8bc6-2fa6445ed6bd/images/11239977_0c135bbf-78e0-43c0-8e82-3a1fad9b55ab_35b17017-3ed2-41cb-bdfd-3f8a5f455ffa/pxl_20251113_092059780.jpg)
![RackSlide Raspberry Pi 5 Drawer with DeskPi KL-P24 [with optional OLED]](https://media.printables.com/media/prints/35fa834e-2fb4-4500-ab55-e59f5d9daebc/images/11239981_1952b0c9-a351-4585-9a7e-1af9ad78d912_e8d3d0eb-23f2-418e-9029-359f870e75f8/pxl_20251113_091932777.jpg)
