MKS SKPIR cooling box/enclosure with DIN rail Clips (CAD included)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed in ABS on BambuLabs P1S for my Mercury 1.1.5 build, MKS SKIPR cooling box with inlays
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The 80mm and 3x40mm version only differ on the “Top” and “Tophat”, The other parts are the same. The holes are all sized to tap with an M3 bolt (to save hardware), except the DIN rail mounts that are sized for the M3 heatsets.
I used a schematic drawing to make the 80mm version. As such, it is untested.
No supports necessary, printed with brim to minimize warping.
DIN rail mounts are reverse engineered from User:m0ep @m0ep_110819
M3 hardware
4x heat set inserts
4x M3x35mm
4x M3x8mm
12x M3x20mm (40mm fan Version)
I have included the CAD file for modifications, and my print profiles for the P1S. I have also included 2 pics of other themes I had considered printing before landing on the “cotton candy” theme I printed,