Govee H6199 Secure Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A more secure mount for your Govee H6199 TV backlight
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 740
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
If you are like me, you may have found sticking the camera from the Govee H6199 TV backlight onto your TV was too distracting, and also provided a poor angle for accurate backlight color reproduction.
This model is designed to allow you to stick the main body of the H6199 camera inside and attach it to something more secure, such as your below-TV entertainment console.
This model WILL need alteration on your part - I designed the leg lengths to be appropriate for my furniture, but yours will vary. The camera easily pops through the hole and into the main chassis for secure placement.
The full model is included as an STL file, but I chopped the bottom legs on mine for easier printing, and super glued them back on after I had the camera in place. I printed with the top facing down (long rectangular flat part). Window hole for the camera printed fine with PLA 10% infill, no special supports required. If you print the full model with the legs included I am sure a support will be necessary.