DN-Badge-Hex-Skill-Plug-version-SAO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds a SAO for your Darknet-NG Badge. Original author is Gator_Byte. See you at
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Adds a standard 6 pin SAO connector for your Darknet-NG Badge.
Includes both Horizontal and Vertical.
Model is pressure fit, but probably a good idea to use some 5 minute epoxy after soldering.
Also include is tool to push SAO connector into place, and doubles as a tool to outline the PCB for cutting. (Put the SAO on the PCB prototyping board, push the pins through the center of the tool on the back, and outline with a sharpie; Slowly cutting it down) You can use Tin snips to cut the PCB, just be sure to wear PPE. (Safety glasses, and a mask)
Quick fix 8/4/23 Vertical was upside down. please use "Hex Skill Vertical - Fixed"
Original author is Gator_Byte. See you at DEFCON 31!