Extruder BIQU H2 + Volcano Hotend Mount for Artillery Sidewinder / Genius
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount Plate for Artillery Sidewinder X2/X1/Genius For Extruder BIQU H2 + Volcano Hotend + Bed Level Probe + ADXL345
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 162
- Makes
- 3
- Views
- 2,963
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
See my improved model here:
https://www.printables.com/de/model/962260-biqu-h2-extruder-adapter-optional-on-linear-rails
Caution, it seems similar, but its incompatible.
Mount Plate with modular FanDuct for Artillery Sidewinder X2 for BIQU H2 Direct Extruder
New Version 3.1
My recommendation is to use this modular Backplate V3.1 with FanDuct "Bite" V1.0 (uses the Interface V1.1)
- The FanDuct itself is modular, it give you the option to support all H2 Extruder variants and all Nozzles (V6, Revo, Volcano,Light...) - design your own!
- The FanDuct has to be download separate. If you like to design your own a Step File with the plug-able interface is provided. Upload it and share with the community
- The Basic FanDuct "Blade" for Volcano Nozzle can found here: https://www.printables.com/de/model/676017/
- The Flow and Space optimized, two side FanDuct "Bite" for Volcano Nozzle: https://www.printables.com/de/model/706196
Supports
- Extruder BIQU H2 V2S with your Volcano Hotend (or the proprietary Lite)
- The volcano hotend should fit to H2 or H2 V2S with native V6 Hotend
- H2 V2S Lite has nearly the same height, so it could also work (not tested)
- I don't know if the water cooled H2 or the Revo Versions work or if the Volcano Hotend can be also mounted to the H2 V2S Lite
- The modular version supports all nozzle and heat block variants as long as you get or design a fanduct for it (share if you do so)
- Antlabs BL Touch V3.1
- BIQU Micro Probe V1/V2
- ADXL345 Mount for Sidewinder X2
- A 5015 Blower Fan (I use it with Sunon Maglev)
Features
V3.1
- Increased space towards heater block
- fixed gap within the plugin mechanism -> Interface file v1.1. (interface v1.0 still works but not optimal)
V3
- Modular Fan Duct
- Add FanDuct Interface Step file for you to design and share your own FanDuct
- Moved Artillery PCB 2mm to the front
V2.1
- Modified Fan Duct, less artifacts
V2
- Made the Extruder mount much more stable (results in more reliability and doubled max x-acceleration input shaper measurement (10000 mm/s², mzv)
- The nozzle has about 5mm to left/right/front/back of the heater bed. To not hit the x-axis stepper, it is moved 5mm upper instead.
- There is an additional hole on the bottom (should fit into Sidewinder X1 - but not tested. Feedback is welcome)
- Easy accessibility of the the lower screw
V1 + V2
- About 30% less weight then the stock titan extruder with volcano hotend
- Less vibrations, higher speed
- Great all Metal BIQU H2 DualGear extruder
- Drop-In Replacement for native Artillery Sidewinder X2
- No further changes to the hardware
- Maybe compatible to X1, Genius Pro if they use the same back-plate (not tested)
- Reuse of Volcano Hotend (high flow) and Extruder Circuit
- Perfect centralized fan ducts, No airflow reduction
- FanDucts came from the back, so nothing disturbed your view to the nozzle tip printing.
- In theory, the air stream hits the heating bed just under the tip of the nozzle
- Mount adapter for ADXL345 Acceleration Sensor (Perfect resonance compensation with Klipper)
- Mount Adapter for Antlabs BLTouch V3.1. This adapter is direct attached to the extruder, so for another type, someone can easily design another variant
- Perfect centralized in front of the Nozzle (Offset X,Y: 0,-26)
- Easy to Print (use heat stable material like ABS or ASA)
Known drawback
- Sorry I have to say I found no other way. You have to extend the cable length of the hotend heater or (more secure) buy a replacement with slightly longer cables.
- If you are not happy with my decision to place the BL Touch direct in front of the nozzle, or do not like the BLTouch, you have to design your own touch sensor adapter :-) Feel free to post it here!
Additional things
- M3 Screws
- 3x M3x8 to mount on the Artillery back-plate
- 2x M3x8 to mount on the Artillery Circuit
- 2x M3x8 to mount the BIQU H2 V2S Extruder
- 2x M3x18 to mount the 5015 Blower Fan
- 2x M3x8 for mount the BL Touch or BIQU Micro Probe
- 2x M3x8 for mount the ADXL345
- M3 Brass Threads Knurled Nuts:
- 4x M3x4x5 for 5015 Blower + Artillery Circuit Board
- 2x M3x4x5 for BL Touch Mount
- M3 Spacer recommended
Installation
- Print the parts with ABS/ASA or similar heat resistant materials
- Get the Screws and Knurled Nuts
- Melt the 2 for the blower fan and the other 2 for the circuit electronics into the Extruder Mount. Melt also the 2 into the probe mount adapter if you use it
- Extend or replace the hotend heater cable by 2 or more cm
- Replace the V6 Hotend of the BIQU H2 Extruder by your Volcano Hotend (or use a new one)
- Remove the nozzle (heated up) form your titan extruder
- Unscrew and screwing the hotend to your new extruder
- Add the nozzle to the new extruder
- Screw the H2 Extruder on the mount-plate (from behind, see pictures)
- Screw the Mount Plate on your Artillery SWX2 (the screw below right is a little cumbersome, take your time)
- Screw your fan on the mount-plate
- Screw your BL Touch or your BIQU Micro Probe on the Extruder
- Attach all the cables on the artillery circuit
- Screw the artillery circuit to the mount-plate on the right
- Optional: Print and prepare the cable clamp.
- Stick some sealing tape or foam to the mount behind the flat ribbon cable (like original)
- Screw it on the back of the circuit board together with the circuit board
- Optional: Screw the ADXL adapter plate on the extruder top
Do all your hardware checks, software calibration and adaptions.
Some more words about that will come to my https://blog.freakydu.de blog.
Things to improve
- Mount the Artillery circuit electronic directly to the Stepper Motor instead
- Make a own circuit electronic together with well positioned neopixel LEDs
Love my 3D models?
If my designs have helped you print something awesome or inspired your next project, consider supporting my work! Your kindness fuels my creativity, keeps the filament rolling, and helps me share even more free/pay-what-you-want models in the future. Every coffee counts!