1 / 2
TÅPPA - Parametric drip irrigation hose plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametrizable Plug for hoses with two rings
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 255
- Makes
- 1
- Views
- 934
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametrizable Plug for low pressure hoses for a hurry. The rear part is to use one spanner, it rounds to millimeters, To print place it on top.
For other sizes, just change the value of the parameter hoseDiameter in the spreadsheet for your needs
There is some confusion in the denomination of the different hoses, sometimes the inner diameter is used, others the outer one. Sometimes in inches an others in rounded millimeters
This table is for the models supplied.
| ID in | ID mm | OD mm | found denominations |
| 4 | 6 mm | 4x6, 6mm, 4mm | |
| 1/4 | 6.35 | ||
| 3/8 | 9.525 | ||
| 1/2 | 12.7 | 16 mm | 13x16, 16mm, 13mm |
| 5/8 | 15.875 | ||
| 3/4 | 19.05 | 25 mm | |
| 1 | 25.4 | 32 mm | 32 mm |
How to print
There is an angle parameter to avoid the use of supports, default is 30º.
