Replacement parts for water cube collapsible 5 gallon container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are replacement parts for a 5 gallon collapsible water storage cube.
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 90
- Makes
- 2
- Views
- 638
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
These are replacement parts for a 5 gallon collapsible water storage cube. These cubes are great for camping, but the valve parts break easily or get lost.
There are 4 parts:
Valve Handle A:
Direct replacement for the original valve handle, assuming the valve base is not broken.
Valve Nut:
Direct replacement for the original threaded part that attaches the valve to the container. Can also be used with the below 'B' valve.
Valve Handle B & Valve Base B:
if your original valve plug is broken/lost you will need to print both of these parts, which are a different design from the original. The original valve base design is not conducive to 3D printing, it would never seal properly.
General Notes:
Tolerances are tight the surfaces that rotate against eachother for the valve seal, may require some adjustment on your printer. I recommend adjusting the valve handle with horizontal expansion until it fits the base properly. Also recommend using a dab of silicone grease or petroleum jelly to lubricate and help it seal better.
Print Settings:
- Printed with 3 walls and 30% infill.
- Adjust horizontal expansion as needed.
- Support recommended for Valve Base B only.
Category: Sport & Outdoors