2020 Panel Corner Hinge, rotates 90 degrees (Voron based)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2020 Panel Corner Clip Hinge (based on Voron). Made for my V1E 3D Printer, details @ https://forum.v1e.com/t/37251/232
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 152
- Makes
- 2
- Views
- 1,971
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
⚠Demo/Details:
37hr Printer build in 60 seconds… ⚠🤯
Made 2020 hinges that can also hold/protect 1/8" (3mm) panels attached to both the top lid panel, and bottom back panel of my V1 Engineering MP3DP v4 ( https://docs.v1e.com/mp3dp ). Hinges need to support Lid weight, and resist twisting/shear forces from the two Gas Struts.
Looked at various designs, ended up forking https://github.com/VoronDesign/Voron-
Trident/blob/main/STLs/Panels/corner_panel_clip_4mm_x8.stl
Printing Notes:
- Printed using Overture Transparent Red PETG, 0.6mm nozzle, . Ensure your bridging settings are dialed in for the corner overhang.
Parts:
- M5x30mm button head bolt
- M5 T-Nut
- 6x M3x10mm button head bolts
- 6x M3 Roll-in nuts. Couldn’t use slide-in nuts since they’re too large to fit in couple of spots where perpendicular 2020 extrusions meet, partly because of the interior 1/16" thick panels sandwiched between the X and Y 2020. Although M3 T-Nuts might fit, they won’t hold Lid as securely/reliably. So… Used Roll-in nuts.
Print left and right pairs of top and bottom parts here, and/or, find latest at Github.
Details about the V1 Engineering MP3DP v4 based 3D Printer this was designed for at https://forum.v1e.com/t/mp3dp-v4-azas-build/37251/232?u=azab2c