2020 Panel Corner Hinge, rotates 90 degrees (Voron based)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020 Panel Corner Clip Hinge (based on Voron). Made for my V1E 3D Printer, details @ https://forum.v1e.com/t/37251/232
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 1977
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
⚠Demo/Details:
37hr Printer build in 60 seconds… ⚠🤯
Made 2020 hinges that can also hold/protect 1/8" (3mm) panels attached to both the top lid panel, and bottom back panel of my V1 Engineering MP3DP v4 ( https://docs.v1e.com/mp3dp ). Hinges need to support Lid weight, and resist twisting/shear forces from the two Gas Struts.
Looked at various designs, ended up forking https://github.com/VoronDesign/Voron-
Trident/blob/main/STLs/Panels/corner_panel_clip_4mm_x8.stl
Printing Notes:
- Printed using Overture Transparent Red PETG, 0.6mm nozzle, . Ensure your bridging settings are dialed in for the corner overhang.
Parts:
- M5x30mm button head bolt
- M5 T-Nut
- 6x M3x10mm button head bolts
- 6x M3 Roll-in nuts. Couldn’t use slide-in nuts since they’re too large to fit in couple of spots where perpendicular 2020 extrusions meet, partly because of the interior 1/16" thick panels sandwiched between the X and Y 2020. Although M3 T-Nuts might fit, they won’t hold Lid as securely/reliably. So… Used Roll-in nuts.
Print left and right pairs of top and bottom parts here, and/or, find latest at Github.
Details about the V1 Engineering MP3DP v4 based 3D Printer this was designed for at https://forum.v1e.com/t/mp3dp-v4-azas-build/37251/232?u=azab2c