Sun elevation measurement tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.15 – €1.41 net (excluding VAT)
For file: other_0.1mm_PLA_MK3S_1h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.28 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.62 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Measures elevation of the sun with sub degree precision.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 40
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
Plumb line piece needs to be printed as set of two and then glue it together, possibly with something heavy inside. Clips needs to be printed 5 times and glue to the sides of base plate. Other parts are not glued as can be folded into transportation position inside base plate. Holder plate must be inserted into holes on bottom side by slightly bending it to fit inside. It holds pieces in transporation position (picture 2).
Attached pdf document needs to be printed on A4 paper, cut and both halves glued overlaying together to get one long strip. Then insert it under clips to base plate.
Plumb line must be attached to thread into holes on top of pillars freely hanging 1-2 mm over base plate. Bottom of it must be aligned with mark on paper before measurement.