OP-Z slim case for TEENAGE ENGINEERING "PVC ROLL UP"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This slim case is intended to be used with the official TE pvc roll-up. Therefor it has a friction-close system.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
I made this slim case to be used with the official TE pvc roll-up.
I have printed other versions available here and there, but most did not fit in the PVC roll-up, only one model did and the problem i found is that the lip for closing is so thin that it breaks pretty fast, and, after two of them i decide to make my own.
Because my intention is to have it inside the roll-up i did not add any closing mechanism, this only relies on friction so if you tilt it you will drop it!
I have included the Fusion 360 file so is easy for you to add a snap lock system if you need it.
For the logo, it is just poured nail varnish in there.
The bottom of the case has a feature to allow the top 4 buttons to slide in without friction.
I printed it all with 6 perimeters to make sure to have a fully rigid model and lighting infill. at .20mm i took me 6 hours to print it all.
If you print it i would love to see a make !!!!
Happy printing!