1 / 6
MadLabRemix - Car Trunk Velcro Organizers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Car Trunk Velcro Organizer for Tripods, Cylindrical Pole Type Objects, Etc.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 43
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
My trunk has been a war zone of things, specially when I transport my camera equipment and tripods. They all just roll around. I hear clinks and clanks not knowing if something is damaged back there!
I am a newbie 3D printer so bear with me! I made these organizers you can velcro on the trunk carpet to hold on to cylindrical items like tripods, etc.
HAPPY PRINTING and REMIX AWAY!!! Let me know if you have any questions.
Please LIKE if you LIKE them! Thank you!!!
| BOM TO BUY: (As an Amazon Associate I earn from qualifying purchases.) | ||
| ½ Inch Velcro | VELCRO Brand VEL-30765-AMS | https://amzn.to/3KAE9wq |
| ¾ Inch Velcro w/Adhesive | VELCRO Brand 90081 | https://amzn.to/3OpoNMa |
| PLA/PLA+/PETG/ABS | Kingroon | https://amzn.to/457lvnV |
Notes:
- Bear in mind if you live in a hot area you might want to print in PETG or ABS for heat resistance.) I like to use Kingroon PLA, this brand produces consistent prints for me and it's a GREAT value.
- You can use other types of Velcro (also other Brands) you have laying around. For example, I had a smaller size Velcro with adhesive and just cut it to size.
| BOM TO 3D PRINT: | ||
| Material Usage | Print Time | |
| Trunk Organizer (Small) | 6g (1.92m) | 32 mins |
| Trunk Organizer (Medium) | 14g (4.61m) | 1 hr 17 mins |
| Trunk Organizer (Large) | 22g (7.26m) | 2 hours |
Notes:
| PRINT/SLICER SETTINGS: | |
| 3D Printer | Ender 3 (Direct Drive) |
| Slicer | Ultimaker Cura 5.4.0 |
| Nozzle | 0.4mm |
| Layer Height | 0.28 |
| Walls | 3 |
| Bottom/Top Layers | 5 |
| Infill | 20% (Adjust as needed) |
| Print Speed | 70mm/s |
| Supports | None |
| Adhesion Type | None |
| Print Orientation | Bottom Side Down |
Notes:
| STL FILES | |
| MadLabRemix - Velcro Trunk | ALL (Small, Medium, Large) |
| MadLabRemix - Velcro Trunk - Small | Small Only |
| MadLabRemix - Velcro Trunk - Medium | Medium Only |
| MadLabRemix - Velcro Trunk - Large | Large Only |