1 / 1
Z-Top's Prusa Firmware
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-Top's modified to pass original Prusa firmware test.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The Z-Tops are 2mm higher than the originals. This is enough to pass the Prusa Z-Calibration test. I have 322mm long Z-Rods installed, these fit exactly between these Z-Tops and the motor mounts. If you only have 320mm long rods I would recommend to use the stiffer motor mounts and fill the gap with a 2mm high cylinder which you can easily create in PrusaSlicer.
Link stiffer Motor Mounts
Happy Printing