Enclosure back plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have your PSU inside cabinet you end up with a hole there. This is a plate to cover that.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 63
- Makes
- 0
- Views
- 851
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
If you have your PSU inside cabinet you end up with a hole there. This is a plate to cover that. It also has a cable support.
Made of three parts:
- Plate. Print in black preferably.
- Bracket. Print standing with support.
- Key. Print with support is good here too I think.
You might need to sand of the edges between bracket and plate to get a smooth fit. It should be easy to slide in. The key should slide in easy but require a little force to turn.
Two options:
- Glue the bracket when you have it in position to make it sit better.
- The plate is made of 2mm material. You could as well make one in acrylic glass, it would be nice. Might do that myself if I find some.
====================================================================
Also check out my other enclosure mods, the top filament rollers. Too early with these so I couldn't have them in the contest, but here they are:
https://www.printables.com/model/467665-enclosure-top-roller-front
https://www.printables.com/model/467704-enclosure-top-roller-mid
