Enclosure back plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have your PSU inside cabinet you end up with a hole there. This is a plate to cover that.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
If you have your PSU inside cabinet you end up with a hole there. This is a plate to cover that. It also has a cable support.
Made of three parts:
- Plate. Print in black preferably.
- Bracket. Print standing with support.
- Key. Print with support is good here too I think.
You might need to sand of the edges between bracket and plate to get a smooth fit. It should be easy to slide in. The key should slide in easy but require a little force to turn.
Two options:
- Glue the bracket when you have it in position to make it sit better.
- The plate is made of 2mm material. You could as well make one in acrylic glass, it would be nice. Might do that myself if I find some.
====================================================================
Also check out my other enclosure mods, the top filament rollers. Too early with these so I couldn't have them in the contest, but here they are:
https://www.printables.com/model/467665-enclosure-top-roller-front
https://www.printables.com/model/467704-enclosure-top-roller-mid
