1 / 2
Addon: Adjustable Vent - Magnetic Ventilation System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have the honor to introduce you…
Addon: Adjustable Vent - Magnetic Ventilation System
Too much air?
Below you have the instructions to carry it out.
Compatible with every 210x210mm bed (MK3+, MK4…)
Fan
Print all models once.
Screws
You will need 4 M3x8 screws, i recommend button heads screws. (You will also need 4 M3 nuts…).
Magnets
To securely attach the pieces together and still be interchangeable, you will need 16 10x2mm magnets.
Before sticking the magnets, make sure that the polarity is correct.
Take a look
and enjoy your Addon: Adjustable Vent - Magnetic Ventilation System