MagFeeder - Magnetic Filament Feeder for Prusa Enclosure [Stackable]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod uses the handle cut-out to provide a firm and secure filament feeding from your drybox.
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 115
- Makes
- 4
- Views
- 2,304
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Usage:
Used to feed the filament from outside of the enclosure. From a spool holder, drybox, or whatever you could source your filament from.
It's installed in place of the optional handle, at the side of the enclosure.
Allowing to Stack multiple enclosures ontop of each other.
Features an Unique magnetic attachment, which allows to easily interact with the filament, without the need of opening the enclosure.
Fits the regular 4mm x 2.5mm PTFE tube.
Hardware required:
![]() | 2x Magnets
|
![]() | 2x Brass Inserts
|
![]() | 2x Festo QSM-M5 |
![]() | 7x m3x12 hex-bolts |
![]() | 3x m3 square nuts |
note: a soldering iron is required in order to hot-press the brass inserts
How to install:
Print one of each piece:
- MagFeeder_Body.stl
- MagFeeder_Cap.stl
- MagFeeder_TubeEnd_A.stl
- MagFeeder_TubeEnd_B.stl
Using your soldering iron, hotpress the two M5x9.5 brass inserts.
Pay attention to the magnets polarity, as they usually come with two variants (regarding the bevel side)

Assembly STEP file is also available
I provide to you the full assembly in .STP, for all your CAD needs.






