Ender 3 S1 Pro display mount revisited
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a complete remake of the original display mount by Minus97 with the added adjustable screwholes by walklife…
- Rating
- 4.833 / 5
- Likes
- 31
- Downloads
- 248
- Makes
- 6
- Views
- 852
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
DISCLAIMER : After further review and comment, it seems that the cable length of printers is not precise at all and can vary from printer to printer. The 60° model, requires at least 160mm from the plug to the base of the printer where the cable comes out. If you do not have this length, I would suggest printing one of the variants with a less steep mounting mechanism.
This is a complete remake of the original display mount by Minus97 with the added adjustable screwholes by walklife and the extended base by selinuahs.
- Removed the "PRO" branding and shaved the corner off so the piece blends in more and look like an integral part of the printer.
- Reduced the height of the slide-on mechanism to save print time and filament.
- Made 3 extra version with different angles to accomodate for different viewing angles, original one was the 50° version, the printed one on display here is the 60° Extra
I recommend printing sideways (the way the STLs come) with tree supports. i have not personally tested the 50°, 40° and 30° but there is no reason they shouldn't work. The only difference is the angle of the display support.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Installing the piece.
- Unplug your display and remove it from the original mounting bracket. Remove the original mounting bracket
- Unscrew the 2 screws in the corner
- Slide the piece in place and screw it back in
- Clip your display on the piece and replug it