DragonBurner Dragonfly BMS 7 Fin Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount supports the Phaetus Dragonfly BMS 7-fin hotend for use with the Dragon Burner v7 toolhead.
- Rating
- 2 / 5
- Likes
- 8
- Downloads
- 91
- Makes
- 1
- Views
- 877
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This mount requires 2 heatset inserts. A huge bonus with using the Dragonfly BMS is you can use 2 M3 SHCS instead of the tiny M2 or M2.5 required by the Dragonfly BMO. I find the BMS side mount with 2 screws is superior to the BMO top mount.
I recommend ASA-CF for strength and heat resistance.
I've tested this mount on a V0.2r1 and successfully printed a 12 minute benchy using a CHT nozzle. It required 270C nozzle temps and held up fine.
It should be printed with the back down so the tie-wrap holes are facing up. The STL should already be in the correct orientation.